Keine exakte Übersetzung gefunden für قرص انفجاري

Frage & Antwort
Textübersetzung
Übersetzung einfügen
Senden

Übersetzen Englisch Arabisch قرص انفجاري

Englisch
 
Arabisch
relevante Treffer

Textbeispiele
  • For aluminium bursting disc read brass or aluminium bursting disc
    يستعاض عن "قرص الانفجار المصنوع من الألومنيوم" ﺑ "قرص الانفجار المصنوع من النحاس الأصفر أو الألومنيوم".
  • The lead washer and aluminium bursting disk are placed in position and the retaining plug is screwed in tightly.
    وتركب الحلقة الرصاصية وكذلك قرص الانفجار المصنوع من الألومنيوم في مكانهما، كما تثبَّت بإحكام سدادة التثبيت الملولبة.
  • After rupture of the bursting disk, the heating should be continued for approximately 30 minutes more to be sure that all dangerous effects are measured.
    وبعد تمزق قرص الانفجار، ينبغي مواصلة التسخين لمدة 30 دقيقة تقريباً، وذلك للتأكد من أن جميع التأثيرات الخطرة قد قيست.
  • 3.1 The apparatus, assembled complete with pressure transducer but without the aluminium bursting disk in position, is supported firing plug end down.
    3-1 يثبت الجهاز الكامل التركيب بجهاز تحويل طاقة الضغط ولكن بدون قرص الانفجار المصنوع من الألومنيوم، بحيث يكون الجانب الذي به قابس الإشعال إلى أسفل.
  • Can you confirm a burst helium disk? We confirm that.
    -هل يمكنكم تاكيد إنفجار قرص من الهيليوم؟ -نحن نؤكد ذلك
  • Fill the test vessel shell with the amount of organic peroxide or self-reactive substance required to give the same degree of fill (by volume of the shell) as to be used in the tank (maximum degree of fill 90 %, by volume) and then install the required orifice plate1 and bursting disk.
    يملأ وعاء الاختبار بكمية الأكسيد الفوقي العضوي أو المادة ذاتية التفاعل المطلوبة لجعل درجة امتلاء الوعاء معادلة (مقارنة بحجم الوعاء) لنفس درجة الامتلاء التي سيكون عليها الصهريج (أقصى درجة للامتلاء، بالحجم، هي 90 في المائة)، ثم تركب الصفيحة ذات الفتحة المطلوبة وقرص الانفجار.
  • The bursting pressure of the disk fixed to the 10 l vessel should be equal to the maximum rupture pressure of the bursting disks to be fitted to the IBC or tank.
    وينبغي أن يكون ضغط الانفجار للقرص المثبت في الصهريج سعة 10 لترات مساوياً لضغط التمزق الأقصى لأقراص الانفجار التي ستثبت في حاوية السوائب الوسيطة أو الصهريج.